SRC AV-5, AV-10 Series

SRC AV-5, AV-10 Series Vacuum Receiver and Filter Chamber

SRC/AV-5 & AV-10 vacuum receivers are used to convey free-flowing granular, powdered or regrind materials in a centralized conveying system.

Flange mount configuration
Integral material demand/level sensor
Internal check valve on material inlet for 2.0”, 2.5” and 3.0”
Painted cover assembly
SSR/AV receivers include angled, counterweighted discharge throat with gasket seal (SSR23-45 —4” Throat, SSR85-170 —6” Throat)
Dual atmospheric valves for control of the vacuum and filter cleaning cycle
Air operated vacuum sequencing valves built into cover of unit. No need for an additional sequence valve
Low maintenance design. No tools required for filter bag cleaning/changes
Large filter bag area for low pressure drop and good material/air separation
Acrylic lined filter bags for better dust release and filter performance
Auxiliary output provided for control of optional air slide gate
Quick access latched cover design
Hopper mounted control of cleaning cycle
24 VDC control voltage

Capacitive volume fill sensor in vacuum receiver
Remote demand sensor for material demand
Air operated slide gate in lieu of standard discharge (4” slide gate for SSR23-45; 6” slide gate for SSR85-170)
Distributed I/O cable connection kit
Special mounting flange pattern (consult factory)
Riser mount configuration (not available when slide gate option is selected)
Optional filter media
70 degree cone for hard to flow materials (not available on SSR23 and SSR45 models)
115 VAC control voltage
Compressed air fluidizing pad system for receiver cone