VI Series
VI Series Edge Trim Conveying Systems
VI edge trim conveying systems are used to convey edge trim to the film grinder. AEC VI Series edge trim conveying systems include a high- pressure radial blade blower, an adjustable blower inlet damper with finger guard, a flanged outlet, and a high-efficiency venturi unit with adjustable venturi tube.
REQUEST A QUOTE Find a rep- Continuous edge trim removal helps keep scrap moving away from the film line and into downstream size-reduction equipment. This supports an organized scrap-handling process and prepares edge trim for further processing.
- An edge trim conveying system transfers film scrap from the trim station to a grinder, creating a connection between scrap generation and size reduction. The ground material can then continue through the facility’s reclaim process.
- Consistent pickup helps move trim away from the production line as it is generated. Maintaining reliable trim movement is especially important when the conveying system must continuously deliver scrap to an adjacent grinder.
- Processors should consider the type of film scrap, conveying distance, trim pickup locations, grinder location, production line layout, and required conveying capacity when configuring an edge trim conveying system.
- The distance between the trim pickup point and grinder is an important system-design consideration because the conveying equipment must move the scrap reliably across the required run. The VI Series is specifically sized for conveying medium-slip edge trim to adjacent grinders within its stated application range.
- The VI Series collects edge trim at the winder trim station and conveys it to a film grinder for size reduction. This makes the conveying system the material-transfer link between edge trim generation and downstream scrap processing.
- Y-tube to connect to the blower venturi inlet
- Two spun bellmouth pickups for field installation at the winder trim station
- One 20 foot (6m) length of metal flex tube to be field-cut into three pieces (based on specific installation to connect venturi, Y-tube and bellmouth pickups)
- Sized to convey medium slip edge trim up to 50 feet (15 m) to adjacent grinders
- 460/3/60 supply voltage
- Edge trim air exhausters (relief heads) and motor starters are not included as standard. They are available at an additional charge.
- Remote or manually operated starter on blower
- Inlet silencer enclosure on blower
- Sound enclosure
- Dual venturis
- Special voltage (details required)
- Edge trim air exhauster (relief head) Size 6 for 5 and 7.5 HP blowers; size 8 for 10 and 15 HP blowers; size 10 for 20 and 25 HP blowers
Stay Updated with AEC News
Sign up today to receive the latest news, product updates and new product releases.