|
|
VI Series Edge Trim Conveying Systems
AEC's VI Series edge trim conveying systems consist of a high-pressure radial blower, an adjustable blower inlet damper with finger guard, a flanged outlet, and a high-efficiency venturi unit with
adjustable venturi tube.
|
|
|
Film Reclaim Systems
AEC's Film Reclaim Systems consist of fluff feed hoppers, fluff tanks, fluff blowers, film grinders, and trim conveying systems. Scrap recycling offers significant cost savings from reduced material consumption because scrap is restored to its original feedstock value. No additional heat history is added to the material, and there is less risk of contamination.
|
|
|
GR1 & GR2, HBD
Film Grinders
AEC's film grinders are designed to handle a wide range of materials and can be equipped with our exclusive feed roll assemblies for automatic feeding of scrap roll stock. AEC's exclusive HBD Series high bulk density film grinders feature high-performance dual-stage design. Scrap film first passes through a primary upper cutting chamber, then through a secondary lower chamber with a smaller screen. HBD grinders provide high throughputs and higher bulk densities with less heat generation and screen blinding.
|
|
|
TE & TFH Fluff
Feed Hoppers
AEC's fluff feed hoppers are designed to feed a percentage of the fluff directly back into the extruder throat. The unique dual-stage design ensures that the fluff is mixed with the virgin material above the extruder throat. Each auger is independently adjustable and can be set to follow the extruder screw speed by monitoring a tachometer signal from the extruder.
|
|
|
FD-FV Fluff Blowers-Cyclones
AEC's FD and FV Series fluff blowers
and S Series cyclone separators are
high-performance blowers and cyclones designed for fluff.
|
|
|
FT Fluff Tanks
AEC's agitated fluff storage tanks are designed with
heavy-duty agitators, to handle your hardest-to-feed materials. FT Series agitated fluff storage tanks receive fluff from a film grinder. A typical application includes optional film grinder, to supply the ground fluff, and an optional TFH or TE fluff feeding pedestal for the extruder.
|
|
|
|
|
RSS