|
|
BD Series Batch Weigh Blenders
The exclusive diamond slide gate design features a proportional cross section to accurately dispense the material at any gate position. With state-of-the art process control, the BD Series Blender provides accurate batch-to-batch consistency.
|
|
|
OA Series Batch
Weigh Blenders
The OA Series Gravimetric Batch Blending System features precision auger metering of all ingredients. This weigh scale blending system is well suited for blending of almost all pellet and regrind materials. The OA Series should be used if more than one regrind is required, or when difficult and hard-to-meter materials will be used.
|
|
|
Touch-Screen Control
AEC&#s Allen-Bradley
PLC-based controller provides state-of-the-art process control at your fingertips.
Operator-friendly controls simplify operation, stores up to 50 recipes and provide unmatched metering accuracy for up to six ingredients, especially below 2%.
|
|
|
OL Series Continuous Blending and Feeding Systems
The OL Series allows metering on a continuous basis from two to seven materials at a metered rate that provides a consistent blend that matches the extruder rate. The OL Series offers the most homogenous blend available, even with low percentage additives. Only the material hoppers are mounted on precision load cells, eliminating the weight and vibration of the metering auger and motor assemblies.
|
|
|
GH-F Series Gravimetric Hoppers
The GH-F Series gravimetric feeder adds colorant or other free-flowing material to your process, based on a self-calibrating controller that makes recalibration unnecessary and eliminates the overfeeding that typically accompanies volumetric feeders.
|
|
|
GH & GH-M Series Extrusion
Control Units
The GH extrusion control and GH-M extruder rate monitor units match the extruder throughput, track material usage, and can control extruder output
with the optional control system.
|
|
|
PB Series
Loss-In-Weight Blenders
The PB Series blender is designed for continuous extrusion applications for powderd or pellet materials and offerst the most homogeneous blend available versus common batch-type blenders or mixers. Materials like PVC, wood fiber and additives can be efficiently blended for your operation.
|
|
|
Precision and AF Series Volumetric Feeders
Precision Series volumetric additive feeders have become the industry standard of accuracy and dependability for precision metering of color concentrate, regrind, or other additives. Proven mechanical features include modular design, low-profile throat section and an easy-to-clean, interchangeable stainless steel auger assembly.
|
|
|
DD Series Digital Dosing System
The DD Digital Dosing System offers precise feeding for almost any plastics machine, whether your application is injection molding, blow molding, or extrusion. The DD 2 dosing unit offers the ability to use dual additives at different rates. The DD dosing unit uses a variable speed DC drive motor and a correctly sized dosing disc to precisely feed powder or pellet additives, at the set rate, into the throat of the processing machine. Precision design and closed loop control ensures high accuracy to setpoint.
|
|
|
Precision Series Controls
The Precision Series Controls come standard with closed-loop control and digital display. The Controls displays set point for speed or rate, and it provides for intermittent or continuous operation.
|
|
|
New A3 Blender Control and Data Acquisition System
The A3 Blender Control and Data Acquisition System is a data collection network program that can be used to download and analyze inventory run rates, run status, and target vs. actual recipe set points. Using A3, you can upload recipes and access recipe storage book functions, as well as start and stop blenders and feeders.
|
|
|
CoExpert-AB Co-Extrusion Control System
The CoExpert-AB extrusion control system is a gravimetric tool that can be integrated with other AEC/HydReclaim gravimetric equipment to produce
greater control over the customer's product specification. The customer can specify recipe entry in several formats consisting of weight per length, weight per area with overall layflat, or simply weight per hour and length per minute. They can mix and match metric units with standard units on all entries.
|
|
|
OI Series Inventory Monitor Unit
OI Series batch weigh inventory and density monitor units are designed to mount on aon existing bin. The OI Series accurately monitor material usage by weight with 1/10% spann-accurate cantilever load cells.
|
|
|
